Motovario Video

Motovario, where motion comes to life.

Pexgol

Exceptional Durability & Flexibility

HPL Series
The Innovative Project by Motovario
Industrial Planetary Gear Reducers
PR-C13

BNC Plug Set, 3 Pieces for Ratchet BN

BNC Plug Set with 3 Pieces for Ratchet BN

This set contains three BNC plugs, supplied together for use with a ratchet BN tool. BNC plugs are bayonet-style connectors used to terminate coaxial cable, so they are a common choice for camera wiring, antenna feeds and other radio-frequency and video connections.

Having three plugs in one pack makes it practical to terminate several cable ends at once, or to keep spares on hand for repairs and future changes. The plugs are meant to be fitted to the end of a coaxial cable and then secured with the ratchet tool, which gives a firm, repeatable crimp rather than a hand-tightened fit.

This product suits installers, technicians and hobbyists who already work with coaxial cable and have the matching ratchet tool. It is a straightforward accessory: the plugs complete the cable end, and the rest of the job is done with the tool and the cable itself.

Before you start, check that the cable diameter and the tool type match the plug type you are fitting. Strip the cable carefully, keep the centre conductor straight and avoid crushing the outer shield. A clean, well-prepared cable end is what gives a reliable connection.

Share on:

BNC Plug Set with 3 Pieces for Ratchet BN

BNC Plug Set, 3 Pieces for Ratchet BN

The BNC plug set with three pieces for ratchet BN is a connector kit for people who terminate coaxial cable. Each plug is a BNC type, the bayonet-style connector widely used on coaxial cables in video, antenna and radio-frequency equipment. The set is supplied with three plugs and is intended for use with a ratchet BN tool.

What is included

  • Three BNC plugs in one set
  • Designed for use with a ratchet BN tool
  • Suited to terminating coaxial cable ends

Key features

BNC connectors are quick to connect and disconnect, which makes them easy to work with during installation and maintenance. A bayonet coupling locks the plug in place with a quarter turn, so the connection stays secure without threaded parts. Because the plug is fitted to the cable end using a ratchet tool, the crimp can be applied consistently, which helps the connection behave the same way from one end to the next.

Three plugs in one set means you can finish several cable ends in one session or keep spares for later work. Keeping a small stock of plugs is useful when cables are damaged, when a connector needs replacing, or when a new run is added to an existing system.

Typical uses

  • Terminating coaxial cable for security camera and video runs
  • Connecting antenna feeds and radio-frequency equipment
  • Repairing or extending existing coaxial cable connections
  • Preparing cable ends for test benches and lab setups

In a camera or antenna installation, the plug is the point where the cable meets the equipment. A poorly fitted connector can cause signal loss, noise or intermittent faults, so it is worth taking care with each end. Trim the cable squarely, strip to the length the plug requires, keep the centre conductor straight and make sure the outer shield is folded back correctly before crimping.

Before you use it

Check that the plug type, cable size and tool all belong to the same system before you start. Mismatched parts are the most common reason for a loose or unreliable connection. Test the finished cable end with the equipment it serves before fixing it in place, and keep the tool in good condition so that each crimp is as consistent as the last.

Who it is for

This set is aimed at installers, service technicians, and hobbyists who already work with coaxial cable and have the matching ratchet tool. It is a practical accessory rather than a complete kit, so it fits best into a workshop or toolbox where cable, tools and connectors are already in use.